When people walk through my living room studio, they are puzzled that I do not own or rent a permanent studio space. What many do not know is that when I’m contracted for a commercial assignment, about 80% of the time I must travel to a location or shot at the client’s home base. And, in many cases that requires transporting several 9 foot seamless backdrops and a whole lot of equipment. I don’t have a giant bus to haul all of my studio gear, so it’s been a trying experience to find the right tools to efficiently pack and tote my mobile studio.
From my arduous time in the music business and traveling all over the United States, I learned the art of consolidating, cramming and compacting. When I first started shooting, everything I owned could be fit into one camera bag and case. I traveled with a slew of speedlights, miniature lightstands and a collapsible softbox. It was the ultimate mobile setup, but after time my clientele grew and so did their demands, which needed proper equipment for capturing the overall vision safely. Over the past two years, my team has developed a system of break-out and break-down that requires a small footprint and very little time. As I acquire more and more equipment, we’ve hit speed bumps and had to adapt. But, the system has held up shoot after shoot, time and time again.
Whether you’re just starting with a few speedlights or travelling with 10 studio strobes, it’s good to have your equipment organized for time efficiency and client perception. I bring the majority of my gear to nearly every shoot, as explained in this article “The Power of Perception – Creating A Reality For Commercial Clients.” There is a level of perception that plays into hauling a truck load of gear on location. Even though you may break out just one single light, the client will notice the equipment and feel as if they are getting more bang for their buck.
My location kit consists of 8 strobes, 2 power packs, 5 collapsible modifiers, 4 reflectors, power cables, extension cables, tools and accessories. All can be packed into one giant tool box; a Stanley 37” Mobile Job Box from Home Depot which is listed at a completely reasonable rate. It’s heavy duty, well-constructed and built for abuse. I’ve seen people customize this job box with steel wheels and heavy duty clamps. But, the stock wheels work just fine for our application. This box has a padded handle that make it easy to lift. We call this box “Stan.”
When on location, safety is our number one concern. With that said, it’s important to have the proper number of sangbags to weight down stands, reflectors, blankets or anything that needs to be secured. Although I own over 25 sandbags, I’ve found that 12 is a good number to take on location. That will allow for nearly every light stand to be weighted and safe from an accidental fall or a blast of wind. Sandbags are heavy and can take a lot of miles off your car. For transport, we’ve found the Stanley 26” Mobile Tool Box is a great portable case for hauling 12 or more sandbags. We call this box “Stan Jr.”
It’s a common problem for photographers to throw around cheap light stands and allow them to slide all over the place during transport. I’ve seen photographers use huge hardshell golf cases or bulky road capsules to haul their lights stands, but for someone with a small car… it’s just impractical. The Original Roll Up from the company Standbagger fits my needs perfectly. Standbagger was founded by photographer Steve Burns who created the product when he found a lack of products on the market. Since I cannot fit a gigantic hardshell golf case as well as “Stan” and “Stan Jr.” in the back of my car the Original Roll Up is befitting and can squeeze into small places.
I do travel with several C-Stands which do not fit in the Standbagger but will break down flat and low profile that can slide into the smallest of clefts.
This is one of the first decisions we have to make as a photographer. There are nearly two dozen major bag and storage companies fighting for your business day in and day out. I’ve experimented and worked with numerous bags over the years and in my opinion Think Tank Photo provides the most efficient, durable camera carrying systems around. They are built for professional travelers and heavy duty users. The Airport Security V2.0 provides enough safe space for everything I need to get the shot. I also use and abuse the Think Tank Photo Memory Card Carrier and DSLR Battery Holder. For a full equipment list, click here.
Apple Boxes and Accessories
These days, if a piece of equipment doesn’t come with a storage container or bag, then it’s either really expensive or really cheap. Fortunately, the rest of my mobile studio has its own home in its own bag which can lay flat along with the Standbagger. In our own game of back-seat Tetris, apple boxes and props are usually found shoved in between a seat or on top of “Stan”
Sometime this past year, we came to a stark realization that we desperately needed a dolly on location to cut down on the number of loads. Our answer was the Rock N’ Roller Multi-Cart R10RT with the expandable shelf. What once took my team 5-10 trips back and forth from the car now requires one mighty trip. Setup time has been reduced in half and with the Multi-Cart shelf we can have our own space for tethering, staging and storage without having to use a client’s table space. We call this cart “Besty.”
My friend Tony Roslund created an incredible and insightful article on the Rock N’ Roller Multi-Cart here.
It’s all led to this; now that packing has been covered you’re going to need a vehicle that can hold your gear. Unfortunately, a beat up VW Beetle or a vintage Chevy Camaro just won’t do the trick. I’ve found that the hatchbacks or “toaster” cars work really well. In my case a Nissan Cube; a strange looking car that has the tendency to turn some heads while driving down the road. But, the low overhead and large storage size is completely worth the bewilderment. I’m not here to tell you what type of vehicle you should own, but consider it an investment making the job more manageable. Aside from gas, a nice spacious car can make your life a whole lot easier.
At the end of the day we all have different workflows and certainly different volumes of equipment, but I can only speak for what has worked for me. So, instead of throwing all that stuff in the backseat or dragging around a cardboard box full of cables and lights, invest in some heavy duty containers. I guarantee you’re on location workflow will become more organized and more affable than ever. Your back can thank me later.
If you’re interested in hauling all of this gear on a part time basis, I’m currently accepting applications for my 2015 internship. If you're a young(18 - 25) photographer or photojournalism/marketing major looking to work hard and learn the ropes in the fashion and advertising industry, please email a current resume and current portfolio to email@example.com! Must live within 150 miles of Louisville, Kentucky.
That is correct Thomas, I can't haul my V-Flats around, so I do relay on reflectors on location if I need to cut light or bounce it.
Very cool, love the Stanley Job Box tip too.
Thanks for reading Glen!
Great article Clay. I think you win the award for "how much sh*t can be crammed in a small space". I would have never guessed you could fit all those modifiers and strobes in one box.
Thank you Jason! LOL! It definitely comes from my experience on the road. You just have to be really good at human "Tetris"
Great Article Clay, this really helps put things in perspective! Thanks for the tips!
Thank you Stevie! Hope all is well my man!
This is great, that's for sharing, Clay! I'm starting to use strobes/speedlights more now and going mobile a few times a month (I'm just a hobbyist). So over the holidays I've began to put together my own travel kit as well, especially since I've already had a few Pelicans laying around and just got a small Gruv Gear cart. I'm working on customizing the interior for the most compact storage I can manage and getting a few DYI arrangements inside boxes. Since I'm a one man show the goal for me is to be able to unpack-ready-to-shoot in 10min or under including tethered setup. Thanks for the tip on the "Stan"... I might have to consider it for all the soft boxes! Can't wait to wrap this up in a few weekends!
Very Cool Alexander! While I could go the route of Pelicans, I would spend a fortune. I need a lot more space. The Stanley boxes work great for my needs. Looks like a great setup! Cheers my friend!
Hey Clay, amazing article. Definitely a huge help as I'm trying to figure out how to move things. I'm not a driver though and live in NYC so definitely not easy.
One question! I see you have both alien bees and profoto mono blocks, is this just to have up to 8 strobes available, or do you have specific uses for each type of strobe?
Thank you Aleksander! It's a mobile setup that would work well for many applications. Walking far distances in NYC is not one of them. But the Multi-Cart might be a worth investment!
I love the Paul C Buff modifiers, that is why I still use the Alien Bees. But I only use them for background or kicker lights. Profoto is always my key.
Makes perfect sense, thanks for the reply Clay! You've got some amazing work!
I saw this setup firsthand back in October and still cannot believe you got all of that into such a consolidated setup. It is definitely efficient and works well.
One question though Clay, looking at your camera gear, you do not have a spare camera body and if so why? I guess if it breaks can always rent one before hand or steal an interns?
You sure did!
I do own another camera, I just do not pack it. I just rarely take it with me. A quick drive back to my home studio is better then sacrificing the space. But, using a interns camera is an easy fix as well!
Gotcha... And thanks for the reply.
Great article. Thanks for sharing.
Thanks for reading Robert!
Great article! And what about flights? How do you transport your studio lights, softboxes, tripods ... in case of flying?
Flying is an entirely different ball game. Unfortunately, I cannot fly with this amount of gear. So I travel with just 4 strobes and small selection of modifiers and rent whatever else I will need. I use Think Tank cases for transport.
Thanks for replying! And transporting the strobes on a plane, I guess your Think Tank cases aren't carry-ons? Are these bags sturdy enough not to get the fragile equipment damaged? Any experience with that?
Think Tank bags are built rock solid. I always make sure the strobes are packaged well before checking them! Never had a problem so far.
Thanks for your reply! Gotta get myself some more of those bags then ;)
I'm in the middle of re-tooling my kit for portability.... It looks like you are using a mix of C-Stands and Manfrotto 420b Combi-booms... I currently have one 420b but have been debating adding a 420csu (steel base version) or a C-stand. I am wondering you opinion on the manfrotto's stability with a strobe and what looks like a PLM/softlighter in the bottom photos, mine starts to arch a bit when I hang an Einstein off the end and I worry.
Also a keyboard case works great for moving larger grip pieces... I scored a used one at a local music-go-round for $70. Super padded, lots of handles, and has wheels.
Thank you for reading Andrew!
The 420B Combo Boom stands have been great for me. They are more portable than a C-stand and the ease of use can't be matched. I've put a ton of weight on the end of the stands and never have had a problem. Just make sure the feet and crossbars are sandbagged to hell!
Right on! Thanks for the tip! Hope this helps!
The apple boxes seem a bit excessive (in cost by B&H) don't you think Clay? Did you try to DIY it or find it locally at apple farms for less, or similar boxes at antique shops/flea markets, etc.?
Thanks for checking out the article Chris! If my client is standing on it, the last thing I want is a DIY solution that has the possibility of collapse. That is just common safety. I do have boxes for staging props and looks, but I never have a client stand on them for stability.
I noticed those props too, did you pick those up at antique shops? They have great texture to those.
Sure did Chris. I tend to hit the antique malls about once a month. I have quite the collection of chairs, stools, boxes and ladders!
I wish someone would produce an apple box that would open on a recessed piano hinge so I could fill it with "stuff" I could then justify the space for these handy dandy boxes! A recessed hinge would allow normal stacking and packing. If anyone knows of any PLEASE let me know.
but what do u use for white seamless? 3m roll??
for the life of me i have not used a cloth material that works better then paper.. suggestions?
Thanks for reading Scott! My car can fit multiple 9 foot seamless rolls of paper with no problem. I also have a plethora of canvas I use that can be rolled up for transport. It's a game of "Tetris" but, we make it happen!
Clay, you dump your Profotos into that big-a$$ dump cart along with all the steel hardware, brackets, doo-dads and whatnots? Man, my Profotos must feel royally pampered in their over-padded Pelican.
I'm lovin' your dolly though. I've been looking at some at B&H, unsure which to pick, but this seems like the perfect setup for our the kids' clothing brands we often work with. That Stanley box even looks like it could fit an oompa loompa. Now where do I find one of those?
Thanks for reading Michael! We go to great lengths to make sure the Profoto's are secure and safe in Stan. Everything has a place.
The Multi-Cart has been a lifesaver, highly recommend!
Was just in Home Depot saying that this Stanley Box would make a great cheapo replacement for the Think Tank production manager we are thinking about purchasing. I was worried about lack of padding, but this definitely gives me the confidence to go with the tool box now.
Perfect Jason! I have nothing against the Production Manager from Think Tank Photo, it's just not big enough for my needs. I need a lot of space for my gear. My stuff is packed in so tight, that I don't need padding, but I would probably recommend padding the walls of the Stanley box for extra protection if you're not filling it up! Thanks for reading my friend!
is that a faux wood floor in the last picture?
Yes Jonathon! Sheet Vinyl.
If you would have told me what was packed in there I would have never believed it before this article. Great stuff!
Thank you Roy! It's possible, you just have to play some "Tetris"
'Saw your extention cord reels.
Check out the site and demo video at:
I use them for battery charger cords to
large extention cords.
Thank you for the great article.
Very cool! Thanks for the tip Jack and thanks for reading. I'll check it out.
Bro i could so do two back flips. This is exactly what I've been looking for!
That is awesome man! Thanks for reading!
Your ability to compress is impressive and inspiring. My needs are a bit different in that I tend to shoot where there is no electricity. I have about 8000ws of studio strobes between 4 monolights, 4 heads and 3 power packs. It is all driven by 2 Honda generators.
I tend to shoot at night in remote locations. To move all this around a site I use a Polaris Ranger Crew. It can take everything I need in one trip.
To move all the equipment at the site I have a 24' utility trailer. I can load up the Ranger and drive out the back of the trailer. I have enough free space to fit a double mattress, in case I am away from home. To get to the locations I have a Dodge 3500 to pull it. The upside is that I have never been without something I needed. The downside is the 14mpg.
Thanks for reading Jeff! Sounds like you have your setup under control! Keep up the awesome work!
A good read Clay. Thanks. I saw the Think Tank battery holder you use and thought it looked like a handy little accessory. Thinking it might be a silly price, i looked at B&H and it was just over $10USD, jumped to Amazon in the UK... £74!!! thats $115 USD!!! Not only can we not buy half (literally) of the lights and modifiers that you guys in the US can but when we can we have to pay through roof for it. Someone is missing a trick by not selling all this gear over here. Its either Your Profoto's Elinchrom's or far eastern "equivalents"
/Big sigh and sad face. . .
Thanks Darren! I'm sorry to hear that, that is a bummer.
Thanks for the shout out brother. We also use a "Stan Jr." for hauling all our grip equipment. That's gotta be pretty heavy with all those sandbags in it!