The tripod is an essential piece of gear for many photographers, and as they become lighter and more portable they become less of an inconvenience to carry. Gitzo has just released a sleek-looking line of travel-friendly tripods that aim to be smartly compact while increasing stiffness and performance over previous versions.
The new Traveler series tripods use Gitzo’s Carbon eXact tubes which were introduced to the Mountaineer line last year. Carbon eXact tubes are made even stronger and stiffer than the previous Carbon 6X tubing that was used. Updating your tripod into a new carbon fiber technology typically means you’ll see more weight savings while at the same time actually gaining more stability and strength and a higher load capacity. This has to do with the developments being made in carbon fiber composition and how to best compress and wrap the carbon fiber material to achieve these desired results.
Gitzo Traveler Tripods also feature legs that fold up 180 degrees and wrap around the center column and head to create a very compact package compared to legs that can only close down and in.
New to the Traveler series is an improved compact leg lock system which allows for taller extended tripods without sacrificing the folding length. Gitzo says that the “new curved external form of G-lock gives users a good grip, while the internal O-ring achieves softer operation and reduces dust and grit from entering the locks and hindering operation.”
You can learn more about each Traveler series below.
Series 0: The slimmest Series 0 (GT0545T) has been added to the Traveler family for the first time. It features slim legs and is the lightest in the range, but does not lose its rigidity due to Gitzo’s new Carbon eXact tubes. This four-section tripod has the shortest closed length of 14.4 inches but can extend to a maximum height of 48.2 inches. The Series 0 Traveler Tripod can accept a maximum payload of 22 pounds weighing at a mere 2.0 pounds.
Series 1: The Series 1 Traveler Tripod has the perfect balance between height and rigidity when shooting, and is lightweight when carrying. The Series 1 five-section Traveler (GT1555T) can reach a superb height of 54.3 inches and can support up to 22 pounds. The Series 1 four-section Traveler tripod (GT1545T) is much taller than its predecessor thanks to the space efficient Traveler G-lock, reaching 60.2 inches, and can also support 22 pounds. Both Series 1 Traveler Tripods weigh in at a mere 2.3 pounds.
Series 2: The Series 2 four-section (GT2545T) has the largest tube diameters of the Gitzo Traveler Tripod family and is ideal for photographers who use longer lenses and require the utmost stability and torsion rigidity. The tripod can accept Gitzo’s optional feet, including spikes and large feet. It reaches a maximum height of 60.8 inches, weighs 2.9 pounds, and can accept a max payload of up to 26 pounds.
The updated Gitzo Traveler tripods are available now through B&H:
Gitzo GT0545T Series 0 legs only - $679.99
Gitzo Kit GK0545T-82TQD - $899.99
Gitzo GT1545T Series 1 legs - $739.99
Gitzo Kit GK1545T-82TQD - $959.99
Gitzo GT1555T Series 1 legs - $769.99
Gitzo Kit GK1555T-82TQD - $989.99
Gitzo GT2545T Series 2 legs - $869.99
Gitzo Kit GK2545T-82QD - $1099.99
Gitzo GM2562T Series 2 Monopod - $289.99